UV Area
Product Name: UV Epoxy
Main ingredients: single component
Scope of application: DIY crystal jewelry, pendant making, surface coating, heat shrinkable film, etc.
Performance characteristics: high transparency, no bubbles, fast curing, low shrinkage, yellowing resistance.
Model: hard rubber thin, hard rubber thick, soft rubber.
Curing method: UV light or strong sunlight curing.
Specifications: 50g/piece, 250g/piece, 1000g/bottle (net weight)
How to use:
1. Prepare tools and materials
UV glue, mold, color essence, glitter, ultraviolet curing lamp, glue adjusting tool, etc.;
2.Glue drip and glue filling
Transparent crystal lighting can be glued directly; you can add color essence and mix and then glue, or you can add a small amount of glitter or other fillers, etc., DIY can use imagination to increase the beauty of the finished product;
3. Defoaming:
The UV glue itself has no bubbles. It is squeezed, shaken, and flowed during operation. Bubbles will inevitably be generated when the color is added. Common defoaming: static defoaming, manual foaming, and gun defoaming;
4. Curing:
After the work is moved under the lamp, turn on the lamp again to avoid micro-rippling on the surface; normal 365NM wavelength power 36W ultraviolet lamp irradiates and cures for about two minutes. Use wavelength 365NM or LED dual light source UV lamp, UV lamp with power below 40W for curing, high-power UV lamp can not control the time;
5.Complete:
After the UV lamp is turned off, it is generally allowed to stand for 5-6 minutes before taking out the finished product. If necessary, the glue can be refilled and cured.
Precautions:
Keep away from fire: avoid contact with fire or overheated objects. Tighten after use to maintain tightness.
Keep away from children: Avoid contact or consumption by children. If accidentally touching the skin, rinse immediately with plenty of water.
Beware of sunlight: avoid sunlight, store in a cool, dry, and dark environment.
